Merge tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.14:

  Core:
   - Avoid get_cd() on cards marked nonremovable

  Drivers:
   - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC
   - dwmmc: Support Hisilicon K3 SoC controllers
   - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM
   - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops
     like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540
   - tegra: Support Tegra124 SoCs"

* tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (55 commits)
  mmc: sdhci-pci: Fix possibility of chip->fixes being null
  mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
  mmc: sdhci: Allow for long command timeouts
  mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling
  mmc: sdhci: fix lockdep error in tuning routine
  mmc: dw_mmc: k3: remove clk_table
  mmc: dw_mmc: fix dw_mci_get_cd
  mmc: dw_mmc: fix sparse non static symbol warning
  mmc: sdhci-esdhc-imx: fix warning during module remove function
  mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
  mmc: core: sd: implement proper support for sd3.0 au sizes
  mmc: atmel-mci: add vmmc-supply support
  mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
  mmc: sdhci: add quirk for broken HS200 support
  mmc: arasan: Add driver for Arasan SDHCI
  mmc: dw_mmc: add dw_mmc-k3 for k3 platform
  mmc: dw_mmc: use slot-gpio to handle cd pin
  mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
  mmc: sdhci-pci: break out definitions to header file
  mmc: tmio: fixup compile error
  ...

Conflicts:
	MAINTAINERS
This commit is contained in:
Linus Torvalds
2014-01-26 11:00:41 -08:00
36 changed files with 1347 additions and 345 deletions

View File

@@ -2460,7 +2460,8 @@ void mmc_rescan(struct work_struct *work)
*/
mmc_bus_put(host);
if (host->ops->get_cd && host->ops->get_cd(host) == 0) {
if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd &&
host->ops->get_cd(host) == 0) {
mmc_claim_host(host);
mmc_power_off(host);
mmc_release_host(host);

View File

@@ -1119,14 +1119,10 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
*/
if (mmc_card_highspeed(card)) {
if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
&& ((host->caps & (MMC_CAP_1_8V_DDR |
MMC_CAP_UHS_DDR50))
== (MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50)))
&& (host->caps & MMC_CAP_1_8V_DDR))
ddr = MMC_1_8V_DDR_MODE;
else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
&& ((host->caps & (MMC_CAP_1_2V_DDR |
MMC_CAP_UHS_DDR50))
== (MMC_CAP_1_2V_DDR | MMC_CAP_UHS_DDR50)))
&& (host->caps & MMC_CAP_1_2V_DDR))
ddr = MMC_1_2V_DDR_MODE;
}

View File

@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/mmc/card.h>
#include <linux/mmc/sdio_ids.h>
#ifndef SDIO_VENDOR_ID_TI
#define SDIO_VENDOR_ID_TI 0x0097
@@ -30,6 +31,10 @@
#define SDIO_DEVICE_ID_STE_CW1200 0x2280
#endif
#ifndef SDIO_DEVICE_ID_MARVELL_8797_F0
#define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128
#endif
/*
* This hook just adds a quirk for all sdio devices
*/
@@ -58,6 +63,9 @@ static const struct mmc_fixup mmc_fixup_methods[] = {
SDIO_FIXUP(SDIO_VENDOR_ID_STE, SDIO_DEVICE_ID_STE_CW1200,
add_quirk, MMC_QUIRK_BROKEN_BYTE_MODE_512),
SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0,
add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING),
END_FIXUP
};

View File

@@ -11,6 +11,7 @@
*/
#include <linux/err.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/pm_runtime.h>
@@ -45,6 +46,13 @@ static const unsigned int tacc_mant[] = {
35, 40, 45, 50, 55, 60, 70, 80,
};
static const unsigned int sd_au_size[] = {
0, SZ_16K / 512, SZ_32K / 512, SZ_64K / 512,
SZ_128K / 512, SZ_256K / 512, SZ_512K / 512, SZ_1M / 512,
SZ_2M / 512, SZ_4M / 512, SZ_8M / 512, (SZ_8M + SZ_4M) / 512,
SZ_16M / 512, (SZ_16M + SZ_8M) / 512, SZ_32M / 512, SZ_64M / 512,
};
#define UNSTUFF_BITS(resp,start,size) \
({ \
const int __size = size; \
@@ -216,7 +224,7 @@ static int mmc_decode_scr(struct mmc_card *card)
static int mmc_read_ssr(struct mmc_card *card)
{
unsigned int au, es, et, eo;
int err, i, max_au;
int err, i;
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
@@ -240,26 +248,25 @@ static int mmc_read_ssr(struct mmc_card *card)
for (i = 0; i < 16; i++)
ssr[i] = be32_to_cpu(ssr[i]);
/* SD3.0 increases max AU size to 64MB (0xF) from 4MB (0x9) */
max_au = card->scr.sda_spec3 ? 0xF : 0x9;
/*
* UNSTUFF_BITS only works with four u32s so we have to offset the
* bitfield positions accordingly.
*/
au = UNSTUFF_BITS(ssr, 428 - 384, 4);
if (au > 0 && au <= max_au) {
card->ssr.au = 1 << (au + 4);
es = UNSTUFF_BITS(ssr, 408 - 384, 16);
et = UNSTUFF_BITS(ssr, 402 - 384, 6);
eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
if (es && et) {
card->ssr.erase_timeout = (et * 1000) / es;
card->ssr.erase_offset = eo * 1000;
if (au) {
if (au <= 9 || card->scr.sda_spec3) {
card->ssr.au = sd_au_size[au];
es = UNSTUFF_BITS(ssr, 408 - 384, 16);
et = UNSTUFF_BITS(ssr, 402 - 384, 6);
if (es && et) {
eo = UNSTUFF_BITS(ssr, 400 - 384, 2);
card->ssr.erase_timeout = (et * 1000) / es;
card->ssr.erase_offset = eo * 1000;
}
} else {
pr_warning("%s: SD Status: Invalid Allocation Unit size.\n",
mmc_hostname(card->host));
}
} else {
pr_warning("%s: SD Status: Invalid Allocation Unit "
"size.\n", mmc_hostname(card->host));
}
out:
kfree(ssr);

View File

@@ -53,6 +53,17 @@ static int process_sdio_pending_irqs(struct mmc_host *host)
return ret;
}
if (pending && mmc_card_broken_irq_polling(card) &&
!(host->caps & MMC_CAP_SDIO_IRQ)) {
unsigned char dummy;
/* A fake interrupt could be created when we poll SDIO_CCCR_INTx
* register with a Marvell SD8797 card. A dummy CMD52 read to
* function 0 register 0xff can avoid this.
*/
mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy);
}
count = 0;
for (i = 1; i <= 7; i++) {
if (pending & (1 << i)) {